| Table of Contents |
|---|
Introduction
FEKO is a comprehensive electromagnetic simulation software tool for the electromagnetic field analysis of 3D structures. It offers multiple state-of-the-art numerical methods for the solution of Maxwell’s equations, enabling its users to solve a wide range of electromagnetic problems encountered in various industries.
...
| No Format |
|---|
module load feko/7.0-n058 OR: module load feko/14.0 Please include the following in the pbs script: mkdir -p $HOME/.feko/7.0 (or mkdir -p $HOME/.feko/14.0) FEKO_USER_HOME $HOME/.feko/7.0 #This is not needed(or FEKO_USER_HOME $HOME/.feko/14.0) #This is not needed: source /sw/feko/7.0.2/bin/initfeko #This is not needed: source /sw/feko/14.0.430/n026/altair/feko/bin/initfeko FEKO FEKO is installed on all nodes on the cluster. However, Griffith University has one Donated license (floating on server gc-prd-erslic) which expires on 2016-09-30 An example of a PBS script is: >>>>>>>>>>>>>>>>> #!/bin/bash #PBS -N FEKO #PBS -m abe #PBS -M farhat.majeed@griffithuni.edu.au #PBS -l select=1:ncpus=2:mem=14gb -l walltime=100:00:00 ###PBS -l select=1:ncpus=2:mem=14gb:host=n058 -l walltime=100:00:00 module load feko/7.0-n058 ####module load feko/14.0 source $HOME/.bashrc echo "Starting job: " mkdir -p $HOME/pbs/feko export FEKO_USER_HOME=$HOME/pbs/feko cd $FEKO_USER_HOME feko /sw/feko/n058/examples/GetStarted_models/Project1-Rectangular_Horn_Antenna/Horn.fek >>>>>>>>>>>>>>>>>>> |
...
| No Format |
|---|
gunzip -c feko_distrib_7.0.2_xxx.tar.gz | tar -xf -
cd feko_install
sh ./INSTALL.SH
>>>>>>>>>>
Checking installation of parallel FEKO version.
For a parallel installation of FEKO on multiple nodes in the following
a command is required to run utilities on the other nodes, or in some
cases also to copy files from this node to the other remote nodes (if
no network file system is used). You can choose either the traditional
rsh/rcp commands (remsh under HP-UX), or the secure shell ssh/scp. The
one selected should already have been setup and should be working, but
this will also be checked later.
You have these choices now:
1 = Cluster installation using ssh/scp
2 = Cluster installation using rsh/rcp (remsh for HP-UX)
3 = Install FEKO on a single node only (then no remote access
or remote copying required)
Please select [1] 3
Local installation on one node only.
When running FEKO on an SGI Altix, then also the highly optimised
SGI MPT is supported by FEKO. This must be available on the system
(i.e. not included with FEKO)
Checking for 1 = MPICH2 ... found (part of FEKO installation)
Checking for 11 = Intel MPI ... found (part of FEKO installation)
Checking for 4 = SGI MPT ... found
Please select now which of these MPI implementations should be used.
Typically the default is detected automatically and should be fine,
i.e. just press return. You can also easily change this later manually,
one just has to change the value of FEKO_WHICH_MPI in the initfeko
script.
Determining the target path for the installation.
Please enter the installation path for FEKO (use an absolute
directory name, not variables such as $HOME or ~). To use the
default just press return: [/opt/feko/7.0] /sw/feko/7.0.2
FEKO will be installed to: /sw/feko/7.0.2
No update, new FEKO installation.
Checking for write permission in this directory ... done.
Creating the FEKO initialisation files initfeko and initfeko.csh
Creating non-existing directory /sw/feko/7.0.2/bin ... done.
New FEKO installation (not an update), cannot keep current settings.
For an out-of-core solution, a directory must be specified for the
location of the possibly quite large out-of-core files. A local (not
remote) directory with write permissions for users intending to use
FEKO should be specified in the following. This selection can always be
changed again later by editing the environment variable FEKO_TMPDIR in
the file /sw/feko/7.0.2/bin/initfeko. Typical choices
would be e.g. /tmp or /scratch. One can also use the current directory
where later during the FEKO run the user will have the FEKO input and
output files, then use . as directory (quota must be large enough).
Please enter your selection now: [.]
Using FEKO_TMPDIR=. (update).
Not setting FEKO_MAXALLOCM (automatic mode of FEKO on this platform).
Now creating the file /sw/feko/7.0.2/bin/initfeko ... done.
Now creating the file /sw/feko/7.0.2/bin/initfeko.csh ... done.
----------------------
Creating default GUI settings file default.ini
---> Press return to continue
----------------------
Extracting FEKO executable files from the source archive
/sw/feko/7.0.2/src/feko_install/LINUX_X86_64.TAR
to the installation directory
/sw/feko/7.0.2
Now extracting files and setting permissions ... done.
----------------------
Extracting 64-bit FEKO GUI files from the source archive
/sw/feko/7.0.2/src/feko_install/LINUX_GUI64.TAR
to the installation directory
/sw/feko/7.0.2
Now extracting files and setting permissions ... done.
----------------------
Extracting FEKO example files from the source archive
/sw/feko/7.0.2/src/feko_install/EXAMPLES.TAR
to the installation directory
/sw/feko/7.0.2/examples
Now extracting files and setting permissions ... done.
----------------------
Copying licence file LICENCE.TXT to the doc subdirectory ... done.
Extracting FEKO documentation files from the source archive
/sw/feko/7.0.2/src/feko_install/DOC.TAR
to the installation directory
/sw/feko/7.0.2/doc
Now extracting files and setting permissions ... done.
----------------------
Creating some links for Intel LINUX (MKL versus ACML).
Done (using MKL).
----------------------
Creating MPI links for LINUX (MPICH2/Intel MPI/etc.).
Link for SGI MPT files will be installed ... done.
Checking FEKO executables dependencies on shared libraries.
No missing dependencies detected.
---------------------
Creating the file /sw/feko/7.0.2/mpi/share/machines.feko
with a list of nodes in case you are running FEKO in a cluster
environment. For a single node (e.g. multi-cpu or multi-core
machine) just select below one node.
Creating non-existing directory /sw/feko/7.0.2/mpi/share ... done.
Expert Mode (please answer with [n] unless you are sure what you do):
If you install FEKO on a parallel cluster with many nodes
(e.g. a 512 node Linux cluster), then entering now 512 node
names interactively might be a very boring task. Do you want
to switch to an expert mode, where you have to provide a
machines file yourself (instructions of how to do this will
be given if you answer 'y')? [n]
The first node to be added is this machine 'gowonda2'.
How many processes shall be run on the node 'gowonda2'
(note that normally this should be equal to the number of
CPUs/cores available on this node) ? [1] 12
Adding entry gowonda2:12
Adding another node: Enter nodename or just press return
to finish: []
Finished adding nodes.
---> Press return to continue
----------------------
Creating a sample .rhosts file /sw/feko/7.0.2/mpi/share/.rhosts.sample.
---> Press return to continue
----------------------
Creating file /sw/feko/7.0.2/license/request with licence information.
This file will be saved on your hard disk, so that you can later send
it to your FEKO distributor. It will not be sent automatically, so that
you can review all the information before sending it.
Processing FEKO licence request, please wait ...
------------------------------------------------
-> Creating request file ...
-> Collecting information for all installed FEKO components ...
-> Checking the availability of secfeko ...
-> Collecting machine codes ...
Using all nodes as found in /sw/feko/7.0.2/mpi/share/machines.feko
Checking node gowonda2 (1 of 1) ...
File
/sw/feko/7.0.2/license/request
has been created, see instructions in this file.
----------------------
Checking for upgrade/installation of Sentinel USB dongle driver.
Dongle driver will now be extracted to /sw/feko/7.0.2/license/Sentinel_SPI
Creating non-existing directory /sw/feko/7.0.2/license/Sentinel_SPI ... done.
Checking for already installed Sentinel USB driver (sntl-sud) ... Not found
If you plan to use a FEKO licence locked to a dongle, you should install
the Sentinel USB dongle driver now.
Do you want to install it? [n]
----------------------
Congratulations, you have now finished the FEKO installation!
Some final notes:
- The initialisation files /sw/feko/7.0.2/bin/initfeko
and /sw/feko/7.0.2/bin/initfeko.csh have been created.
For bash/sh/bsh/ksh shells the script initfeko should be executed
from the user file $HOME/.profile or $HOME/.bash_profile or
whatever the name of the applicable file is as
. /sw/feko/7.0.2/bin/initfeko
(note the dot and then the space).
For csh/tcsh shells the script initfeko.csh should be executed
from the user file $HOME/.cshrc or $HOME/.login or
whatever the name of the applicable file is as
source /sw/feko/7.0.2/bin/initfeko.csh
- A file /sw/feko/7.0.2/license/request has been created. Please send
this file to your FEKO distributor. If you are unsure about whom
to contact, please check http://www.feko.info/contact.htm.
You will then receive a password file secfeko.dat, which must be
installed at the location /sw/feko/7.0.2/license/secfeko.dat.
- Once you have received and installed the licence file secfeko.dat,
it is higly recommended to run the FEKO updater feko_update_gui
(GUI version) or feko_update (command line version). If you have
a parallel FEKO installation on a cluster and FEKO is installed
on each node locally, then this must be executed on each cluster
node.
- You have installed FEKO not from the FEKO DVD but from a temporary
directory on your hard disk. You can now delete this temporary
directory /sw/feko/7.0.2/src/feko_install with all files inside.
>>>>>>>>>> |
Feko 14.0
| No Format |
|---|
Usage: module load feko/14.0
Installation
=============
The installation has completed successfully.
A valid Altair license is needed to run the installed HyperWorks products or a setup of the ALTAIR_LICENSE_PATH environment variable to point to a valid Altair License Manager.
When requesting a license, an appropriate host ID needs to be supplied to Altair. To find the host ID, run the command "/sw/feko/14.0.430/n026/altair/security/bin/linux64/almutil -hostid"
Refer to the installation guide for further details on obtaining an Altair license host ID.
The initialisation file "/sw/feko/14.0.430/n026/altair/feko/bin/initfeko has been created. For bash/bsh/ksh shells the script initfeko should be executed from the user file HOME/.bash_profile or whatever the name of the applicable file is as
. /sw/feko/14.0.430/n026/altair/feko/bin/initfeko
(note the dot and then the space). Also note that the script only supports bash-compatible shells (i.e. not sh or csh).
After the installation has finished, the installation log content will be available in log files located in:
/sw/feko/14.0.430/n026/altair/logs
Press "Done" to quit the installer.
|