Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 21 Next »

Introduction

OpenFOAM is a framework for developing application executables that use packaged functionality contained within a collection of approximately 100 C+ libraries. OpenFOAM is shipped with approximately 250 pre-built applications that fall into two categories: solvers, that are each designed to solve a specific problem in fluid (or continuum) mechanics; and utilities, that are designed to perform tasks that involve data manipulation.

Source: https://cfd.direct/openfoam/user-guide/

Usage

module load OpenFoam/4.0.0
 
echo "alias of40=' source \/sw/OpenFoam/OpenFOAM-4.0/etc/bashrc WM_LABEL_SIZE=64 WM_COMPILER_TYPE=ThirdParty FOAMY_HEX_MESH=yes'"  >> $HOME/.bashrc

>>>>>>>>>>>
Add this into your $home/.bashrc
alias of40=' source \/sw/OpenFoam/OpenFOAM-4.0/etc/bashrc WM_LABEL_SIZE=64 WM_COMPILER_TYPE=ThirdParty FOAMY_HEX_MESH=yes'  
>>>>>>>>>>>
End User Update: Nov 5th 2018:
=================================
Add this into your $home/.bashrc
alias of40='module load OpenFoam/4.0.0; source \/sw/OpenFoam/OpenFOAM-4.0/etc/bashrc /sw/OpenFoam/OpenFOAM-4.0/etc/pref.sh WM_LABEL_SIZE=64 WM_COMPILER_TYPE=ThirdParty FOAMY_HEX_MESH=yes';
>>>>>>>>>>>>>>>>>>>>>>>>>

source /sw/OpenFoam/OpenFOAM-4.0/etc/bashrc WM_LABEL_SIZE=64 WM_COMPILER_TYPE=ThirdParty FOAMY_HEX_MESH=yes

Reminder: Whenever you start a new terminal window or tab, you should run the alias command associated to the OpenFOAM 4.0 shell environment. In other words, run the following command whenever you start a new terminal:

of40


Installation

##source: https://openfoamwiki.net/index.php/Installation/Linux/OpenFOAM-4.0/CentOS_SL_RHEL
module load library/libxml2/2.5
module load misc/extralibs/extralibs
module load library/bzip2/1.0.6fpic
module load NetCDF/4.4.1.1-gnu
module load misc/openssl/1.0.2
module load jdk/1.8.0_66
module load library/xz/5.3.3
module load library/gdal/2.3.0
module load misc/curl/7.54.0
module load library/gmp/6.0.0
module load pcre/8.39
module load mpi/openMPI/1.8.5-gcc4.9.0
module load library/mpfr/3.1.2
module load gcc/6.3.0
module load library/geos/3.6.1
module load library/hdf5/1.8.18-parallel
module load library/bzip2/1.0.6
module load library/hdf5/1.8.18
module load library/tiff/4.0.7
module load openmpi-x86_64
module load ATLAS/3.9.39
module load misc/rtmpdump/rtmp
module load library/libgeotiff/1.4.1
module load library/expat/2.2.0
module load library/mpc/1.0.2
module load jags/4.2.0
module load R/3.4.0
module load library/jasper/1.900.1
module load library/zlib/1.2.11
module load library/zlib/1.2.5

cd /sw/OpenFoam/OpenFOAM-4.0
wget "http://download.openfoam.org/source/4-0" -O OpenFOAM-4.0.tgz
wget "http://download.openfoam.org/third-party/4-0" -O ThirdParty-4.0.tgz
 
tar -xzf OpenFOAM-4.0.tgz
tar -xzf ThirdParty-4.0.tgz
 
mv OpenFOAM-4.x-version-4.0 OpenFOAM-4.0
mv ThirdParty-4.x-version-4.0 ThirdParty-4.0
cd ThirdParty-4.0
mkdir download
wget -P download http://www.cmake.org/files/v3.2/cmake-3.2.1.tar.gz
wget -P download https://github.com/CGAL/cgal/releases/download/releases%2FCGAL-4.8/CGAL-4.8.tar.xz
wget -P download http://sourceforge.net/projects/boost/files/boost/1.55.0/boost_1_55_0.tar.bz2
tar -xzf download/cmake-3.2.1.tar.gz
tar -xJf download/CGAL-4.8.tar.xz
tar -xjf download/boost_1_55_0.tar.bz2
cd /sw/OpenFoam/OpenFOAM-4.0
sed -i -e 's/\(boost_version=\)boost-system/\1boost_1_55_0/' OpenFOAM-4.0/etc/config.sh/CGAL
sed -i -e 's/\(cgal_version=\)cgal-system/\1CGAL-4.8/' OpenFOAM-4.0/etc/config.sh/CGAL
ln -s /sw/gcc/4.8.5 /sw/OpenFoam/ThirdParty-4.0/platforms/linux64/gcc-4.8.5
module load openmpi-x86_64
source /sw/OpenFoam/OpenFOAM-4.0/etc/bashrc WM_LABEL_SIZE=64 WM_COMPILER_TYPE=ThirdParty FOAMY_HEX_MESH=yes
alias of40=' source \/sw/OpenFoam/OpenFOAM-4.0/etc/bashrc WM_LABEL_SIZE=64 WM_COMPILER_TYPE=ThirdParty FOAMY_HEX_MESH=yes'
of40
>>>>>>>>>>>
Add this into your $home/.bashrc
echo "alias of40=' source \/sw/OpenFoam/OpenFOAM-4.0/etc/bashrc WM_LABEL_SIZE=64 WM_COMPILER_TYPE=ThirdParty FOAMY_HEX_MESH=yes'"  >> $HOME/.bashrc
>>>>>>>>>>>>
cd $WM_THIRD_PARTY_DIR
wget "https://raw.github.com/wyldckat/scripts4OpenFOAM3rdParty/master/getGcc"
wget "https://raw.github.com/wyldckat/ThirdParty-2.0.x/binutils/makeBinutils"
wget "https://raw.github.com/wyldckat/ThirdParty-2.0.x/binutils/getBinutils"
chmod +x get* make*

cd $WM_THIRD_PARTY_DIR
./makeCmake > log.makeCmake 2>&1
wmRefresh
./getGcc gcc-4.8.5 gmp-5.1.2 mpfr-3.1.2 mpc-1.0.1
./makeGcc -no-multilib > log.makeGcc 2>&1
wmRefresh
./getBinutils
./makeBinutils gcc-4.8.5 > log.makeBinutils 2>&1
# This next command will take a little while...
./makeCGAL gmp-5.1.2 mpfr-3.1.2 > log.makeCGAL 2>&1
 
#update the shell environment
wmRefresh
cd $WM_THIRD_PARTY_DIR
 
#Get the scripts we need
wget https://github.com/wyldckat/scripts4OpenFOAM3rdParty/raw/master/getQt
wget https://github.com/OpenFOAM/ThirdParty-2.4.x/raw/master/makeQt
wget -P etc/tools/ https://github.com/OpenFOAM/ThirdParty-2.4.x/raw/master/etc/tools/QtFunctions
 
#make them executable
chmod +x getQt makeQt
 
#define correct download version and download it
sed -i -e 's=4\.6=4.8=' -e 's=4\.8\.4=4.8.6=' -e 's=/\$major/\$tarFile=/$major/$version/$tarFile=' getQt
./getQt
 
./makeQt qt-4.8.6 > log.makeQt 2>&1

cd $WM_THIRD_PARTY_DIR
 
#this will take a while... somewhere between 30 minutes to 2 hours or more
./makeParaView -qmake $WM_THIRD_PARTY_DIR/platforms/$WM_ARCH$WM_COMPILER/qt-4.8.6/bin/qmake -mpi -python > log.makePV 2>&1

Once the makeParaView script is finished running, make sure to check the contents of the file log.makePV and check if there are any errors. 

wmRefresh

Now let's build OpenFOAM:Go into OpenFOAM's main source folder:cd $WM_PROJECT_DIR
./Allwmake -j 4 > log.make 2>&1

The "4" refers to the number of cores to be used for building in parallel. In addition, the amount of RAM needed for building scales with the number of cores used, something like 1GB of RAM per core; a minimum of 1.5GB is needed for linking the libraries, which is not done in parallel.

Run it a second time for getting a summary of the installation:./Allwmake -j 4 > log.make 2>&1

To check if everything went well:Check if icoFoam is working, by running this command:

icoFoam -help

Usage: icoFoam [OPTIONS]
options:
  -case <dir>       specify alternate case directory, default is the cwd
  -noFunctionObjects
                    do not execute functionObjects
  -parallel         run in parallel
  -roots <(dir1 .. dirN)>
                    slave root directories for distributed running
  -srcDoc           display source code in browser
  -doc              display application documentation in browser
  -help             print the usage

Using: OpenFOAM-4.0 (see www.OpenFOAM.org)
Build: 4.0

Reminder: Whenever you start a new terminal window or tab, you should run the alias command associated to the OpenFOAM 4.0 shell environment. In other words, run the following command whenever you start a new terminal:of40


Sample pbs script

#PBS -m abe
#PBS -M Myemail@griffith.edu.au
#PBS -N MyOpenFOAM
#PBS -l select=1:ncpus=1:mem=1g,walltime=1:00:00

# specifies the input file and output file
##jobname=MyOpenFOAMrun
##jobInput=~/pbs/olafoam/myrun.inp

## sets up the OpenFOAM environment
module load OpenFoam/4.0.0
module list
source /sw/OpenFoam/OpenFOAM-4.0/etc/bashrc WM_LABEL_SIZE=64 WM_COMPILER_TYPE=ThirdParty FOAMY_HEX_MESH=yes
cd $PBS_O_WORKDIR
# starts simulation
icoFoam -help


OpenFOAM on GriffithHPC

Ref: https://www.palmetto.clemson.edu/palmetto/software_singularity.html

Singularity is installed on the nodes but if needed latest version of singularity can be loaded with
#module load singularity

The container with openfoam6-paraview54 can be located in: /sw/OpenFoam/Containers/openfoam6-paraview54_latest.sif

We use singularity shell to start a container, and run a shell in the container.

The -B option is used to “bind” the /scratch/$USER directory to a directory named /scratch in the container.

We also the --pwd option to specify the working directory in the running container (in this case /scratch). This is always recommended.


singularity shell -B /scratch/s123456:/scratch --pwd /scratch /sw/OpenFoam/Containers/openfoam6-paraview54_latest.sif

Using it with PBS scheduler, we need to set up two bash scripts: the launch script that gets executed inside singularity and the PBS scheduler script that instructs the scheduler to start singularity.

==============
Prep the Image
===============
mkdir ~/Container
cp -r /sw/OpenFoam/Containers/openfoam6-paraview54_latest.sif-centos ~/Container


======================================
Launcher Script: singularity_launch.01
==========================
source /opt/openfoam6/etc/bashrc 
cp -r $FOAM_TUTORIALS/incompressible/simpleFoam/pitzDaily .
cd pitzDaily
blockMesh
simpleFoam

#Make sure that it is executable with chmod +x singularity_launch.01


===================
pbs script: pbs.01
==================

#!/bin/bash -l
#PBS -m abe
#PBS -M YourEmail@griffith.edu.au
#PBS -V
#PBS -N TestOPENFOAM
#PBS -q workq
#PBS -l select=1:ncpus=1:ngpus=1:mem=32gb,walltime=30:00:00
cd  $PBS_O_WORKDIR
##run singularity
#singularity shell -B /scratch/s12345:/scratch --pwd /scratch /sw/OpenFoam/Containers/openfoam6-paraview54_latest.sif
singularity shell -B /scratch/s12345:/scratch --pwd /scratch /sw/OpenFoam/Containers/openfoam6-paraview54_latest.sif
singularity shell -B /scratch/s12345:/scratch --pwd /scratch/scratch/s12345:/scratch --pwd /scratch --nv /sw/OpenFoam/Containers/openfoam6-paraview54_latest.sif /scratch/s12345/singularity_launch.01
#singularity shell -B /share/data:/mnt --nv ubuntu.simg /mnt/[PATH TO ExoGAN]/singularity_launch_gan.sh
cat /etc/os-release
exit
sleep 2


Another example of usage on the new cluster


Initial Prep:
=============
 
Copy the images into the local container folder:
 
mkdir ~/Container
cp /sw/Containers/singularity/images/openfoam7-paraview56_latest.sif ~/Container/

Shell into the container and create launcher script:
====================================================
 
Initial setup
 
1. shell into the container
=============================
For example:

singularity  shell -B /scratch/s12345:/scratch --pwd /scratch/s12345:/scratch --pwd /scratch  /export/home/s12345/Container/openfoam7-paraview56_latest.sif
 
e.g:

singularity  shell -B /scratch/s5126720:/scratch --pwd /scratch/s5126720:/scratch --pwd /scratch  /export/home/s5126720/Container/openfoam7-paraview56_latest.sif
 
2. Create a variable file you can source
 
Once in the shell, create a variable file with contents like this:
 
vi /scratch/openFOAMenv.sh
export LD_LIBRARY_PATH=/opt/paraviewopenfoam56/lib:$LD_LIBRARY_PATH
export LIBRARY_PATH=/opt/paraviewopenfoam56/lib:$LIBRARY_PATH
export PATH=/opt/openfoam7/bin:/opt/paraviewopenfoam56/bin:$PATH
export   LDFLAGS=-L/opt/paraviewopenfoam56/lib:$LDFLAGS
export   PKG_CONFIG_PATH=/sw/library/loki/0.1.7/lib/pkgconfig:$PKG_CONFIG_PATH
export   INCLUDE=/opt/paraviewopenfoam56/include:$INCLUDE
export   CPLUS_INCLUDE_PATH=/opt/paraviewopenfoam56/include:$CPLUS_INCLUDE_PATH
export   CPATH=/opt/paraviewopenfoam56/include:$CPATH
export   C_INCLUDE_PATH=/opt/paraviewopenfoam56/include:$C_INCLUDE_PATH
export   FPATH=/opt/paraviewopenfoam56/include:$FPATH
export   CFLAGS=-I/opt/paraviewopenfoam56/include:$CFLAGS
export   CPPFLAGS=-I/opt/paraviewopenfoam56/include:$CPPFLAGS
export   CXXFLAGS=-I/opt/paraviewopenfoam56/include:$CXXFLAGS
export   FCFLAGS=-I/opt/paraviewopenfoam56/include:$FCFLAGS
export   FFLAGS=-I/opt/paraviewopenfoam56/include:$FFLAGS


3. Manual Test Run
===================
 
source /scratch/openFOAMenv.sh 
foamInfo -help

For example:
 
Singularity openfoam7-paraview56_latest.sif:/opt/openfoam7> foamInfo -help

Usage: foamInfo [OPTIONS] <name>
options:
  -all     | -a        list all tutorials that use <name> (otherwise maximum 10)


4. Create a Launcher Script;
===========================
Once you are happy that all step 1 ,2 and 3 works, you can create a launcherScript
While still inside the shell:
 
vi /scratch/openfoamLauncher.sh
 
An example of the content is this:

export LD_LIBRARY_PATH=/opt/paraviewopenfoam56/lib:$LD_LIBRARY_PATH
export LIBRARY_PATH=/opt/paraviewopenfoam56/lib:$LIBRARY_PATH
export PATH=/opt/openfoam7/bin:/opt/paraviewopenfoam56/bin:$PATH
export   LDFLAGS=-L/opt/paraviewopenfoam56/lib:$LDFLAGS
export   PKG_CONFIG_PATH=/sw/library/loki/0.1.7/lib/pkgconfig:$PKG_CONFIG_PATH
export   INCLUDE=/opt/paraviewopenfoam56/include:$INCLUDE
export   CPLUS_INCLUDE_PATH=/opt/paraviewopenfoam56/include:$CPLUS_INCLUDE_PATH
export   CPATH=/opt/paraviewopenfoam56/include:$CPATH
export   C_INCLUDE_PATH=/opt/paraviewopenfoam56/include:$C_INCLUDE_PATH
export   FPATH=/opt/paraviewopenfoam56/include:$FPATH
export   CFLAGS=-I/opt/paraviewopenfoam56/include:$CFLAGS
export   CPPFLAGS=-I/opt/paraviewopenfoam56/include:$CPPFLAGS
export   CXXFLAGS=-I/opt/paraviewopenfoam56/include:$CXXFLAGS
export   FCFLAGS=-I/opt/paraviewopenfoam56/include:$FCFLAGS
export   FFLAGS=-I/opt/paraviewopenfoam56/include:$FFLAGS
cd /scratch
#Put your run instructions/command below.
foamInfo -help

>>>>>>>>>>>>> 

make it executable:
chmod +x /scratch/openfoamLauncher.sh

Run it manually and check if it gives the expected reults:

Check if it gives the expected results:
/scratch/openfoamLauncher.sh
(OR: try cd /scratch;./openfoamLauncher.sh)

5. Running it as a batch job:
==============================

Exit the shell and create this pbs script anywhere in space:
 
vi pbs.01
 
>>>>>>>>> 
#!/bin/bash 
#PBS -m abe
#PBS -M YourEmail@griffith.edu.au
#PBS -N TestOpenFoam
#PBS -q workq
#PBS -l select=1:ncpus=1:mem=2gb,walltime=3:00:00
cd  $PBS_O_WORKDIR
#An example is as below. Modify accordingly to suit your needs
singularity  exec -B /scratch/s5126720:/scratch --pwd /scratch/s5126720:/scratch --pwd /scratch  /export/home/s5126720/Container/openfoam7-paraview56_latest.sif "/scratch/openfoamLauncher.sh"
exit
sleep 2
>>>>>> 
 
Submit the job and check the results.
 
qsub pbs.01


Reference

  1. https://openfoamwiki.net/index.php/Installation/Linux/OpenFOAM-4.0/CentOS_SL_RHEL
  2. https://openfoamwiki.net/index.php/Installation/Linux/OpenFOAM-4.0
  3. https://openfoamwiki.net/index.php/Main_Page
  4. https://cfd.direct/openfoam/user-guide/
  • No labels